Prism rod adjustment station

Prism rod adjustment and control station

• A complete station for prism rod adjustment and checking
• Easily mounted on the wall (all you need is a free wall space of 80cm or longer)
• Installation and user guide (pdf)

Instruction

• After mounting the alignment station, the prism rods can be checked in an instant (however, you must first calibrate and align the brass bolts with a spirit level).
• Place the prism rod in the station and press lightly against the two adjustable brass bolts.
• If the circular bubble is not out of alignment, simply remove the prism rod - the check is complete within seconds.
• When making the adjustment, you should be able to rotate the rod 360 degrees and the bubble should always be in the right position if you have done it correctly.
• If the circular bubble needs to be adjusted, attach the prism rod with the wooden wedge to the station so that it is pressed against the brass bolts. The bubble can then be adjusted.
• The adjustment of the circular bubble is carried out with the tool kit stored in the practical tool holder on top of the unit.
• A small screwdriver and two Allen keys 2.0mm and 2.5mm are included in the high-quality tool kit.
• Feel free to complement the adjustment station with one of our spirit levels: https://www.geofix.se/verktyg/vattenpass