Prism holder 5/8

Prism holder 5/8

Prism holder 5/8 Holder with ball joint Adjustable vial and a host adapter for prism with 5/8 mount

Experience has shown that ground points are often lost during construction as wall points. Prisms on rods are always at risk in heavy traffic and tie up a relatively large number of personnel.

With this reflector holder, prisms can be attached directly to structures with high repeatability and in exact alignment. The wall holder has an M8 internal thread that accepts ball joints equipped with a reflector holder.

The reflector holder can be tilted 360° radially and swivelled by approximately 30°. Even with gross installation errors, the reflector holder can therefore be aligned precisely using the precisely pre-aligned 35'-box level. The distance to the wall (face of the bolt to the center of the adapter) is exactly 100 mm.